Patroit Heads and Cam Users Post your rwhp & 1/4 mile data
#1
Patroit Heads and Cam Users Post your rwhp & 1/4 mile data
Patroit Heads and Cam Users Post your rwhp, time to show off
Seems like there's been enough time for more of the Pat users to get their heads installed etc. Let's see a list of the results.
UPDATED List
ET 1/4 mile & dyno results
Gomer
2002 M6 Z28. B&B triflow, Spec Stage III clutch, TR220 cam kit,Patriot Stage II 5.3 heads, Jet hot coated Hooker long tubes and MTI lid with filter. 403 rwhp 384 rwtq
Gomer
2002 M6 Z28. B&B triflow, Spec Stage III clutch, TSP 231/237 cam,Patriot Stage II LS6 heads w/ 59cc chambers, ASP pulley, Thunder ported TB, Yella Terra Rockers, Jet hot coated Hooker long tubes and MTI lid with filter. Dyno 451.4rwhp 403.5rwtq
Whitey
(11.72 & 11.76), I was happy with the times considering I have a pretty conservative package (PP 5.3 stage 2 heads, ls6 intake, TR224, Mac headers, Sy-3500 convertor,3:23 gears and still run my street front tires (17"),no cutout & no tune other than raise my shift point to 6500).
Tally Trans Am
Cam only:
DA= 1450
ET's = mid to high 12.8's
MPH = high 111's-low 112's
H/C:
DA=1740
ET's = low to mid 12.5's
MPH's = low to mid 115's
both sixties were in the 2.1-2.2 range
correcting both times for weather i gained just over 4 tenths and 4 mph.
the car also hasnt been tuned since i put the heads on
IMKMFAST
'99 car below,377.9hp & 395.3tq,1/8 mile once,best time eighth mile has been 7.405...91.28mph,
1999 Ram Air T/A,Pewter/Tan,346,A4,Patriot Performance StageII 5.3,Comp Cam XER 224,TSP tune,TCI SSF3500,Hooker Lt,ORP,SLP Dual Dual,Harlan 2-step,3.73,TA Civer,Wolfe 6-point,NX wet kit,Boyd Coddington Blasters 17/9.5,Weld Superlite skinnys & 15x10 w/ET Streets for the track
2000 Ram Air T/A,Black/Ebony,422,TH400,4200 stall,Patriot Performance StageIII,MTI S-1,9 inch 3.89,Wolfe 6-point,Weld Aluma Star skinny & 15x10s w/28s
Mustang Hat'r 2
12.38 @ 115.8 WITH A 2.06 60 FOOT w/heads old time was 12.71 @ 112.7 with a 60ft of 1.992 DA 2300, improved by ~.33 sec in ET and ~3.1 mph
Mustang Hat/r2
2000 BLK TA M6
PATRIOT 5.3L STAGE 2 HEADS
TR224/224 112LSA, HOOKER LT & ORY PIPE, SHITMASTER CATBACK, CARTEK CLUTCH, STRANGE 12 BOLT WITH 4.11, BMR SUSPENSION
11.87 @ 116.65 WITH A 1.70 60 FOOT +1400 DA
4thGenRetard
391hp/378Tq
Patriots LS1 II's with MTI SS1 (220/220 .581/.581 115 lsa)
Still need updated tuning though, I think I can break 400+
No track time yet but very low 12's on G-Tech Pro.
2001 Z28-A4
WOT
2001 Black WS6
Patriot 5.3, stage 2's/ TSP 231/237/598/595/112 Electric water pump/ asp pulleys/ TSP ported throttle body/ TSP lid/ Spec Stage 3/ SLP headers and y
446 RWHP
408 RWTQ
V8maro
1999 Black Camaro SS M6 - Lethal SS, 232/228 .595/.588 112 LSA - Patriot Performance S2 5.3L heads - LS1 intake, stock manifolds, 345.1 RWHP, 322.4 RWTQ - After H/C & Tune on a mustang dyno.
I think there are some impressive results listed.
Seems like there's been enough time for more of the Pat users to get their heads installed etc. Let's see a list of the results.
UPDATED List
ET 1/4 mile & dyno results
Gomer
2002 M6 Z28. B&B triflow, Spec Stage III clutch, TR220 cam kit,Patriot Stage II 5.3 heads, Jet hot coated Hooker long tubes and MTI lid with filter. 403 rwhp 384 rwtq
Gomer
2002 M6 Z28. B&B triflow, Spec Stage III clutch, TSP 231/237 cam,Patriot Stage II LS6 heads w/ 59cc chambers, ASP pulley, Thunder ported TB, Yella Terra Rockers, Jet hot coated Hooker long tubes and MTI lid with filter. Dyno 451.4rwhp 403.5rwtq
Whitey
(11.72 & 11.76), I was happy with the times considering I have a pretty conservative package (PP 5.3 stage 2 heads, ls6 intake, TR224, Mac headers, Sy-3500 convertor,3:23 gears and still run my street front tires (17"),no cutout & no tune other than raise my shift point to 6500).
Tally Trans Am
Cam only:
DA= 1450
ET's = mid to high 12.8's
MPH = high 111's-low 112's
H/C:
DA=1740
ET's = low to mid 12.5's
MPH's = low to mid 115's
both sixties were in the 2.1-2.2 range
correcting both times for weather i gained just over 4 tenths and 4 mph.
the car also hasnt been tuned since i put the heads on
IMKMFAST
'99 car below,377.9hp & 395.3tq,1/8 mile once,best time eighth mile has been 7.405...91.28mph,
1999 Ram Air T/A,Pewter/Tan,346,A4,Patriot Performance StageII 5.3,Comp Cam XER 224,TSP tune,TCI SSF3500,Hooker Lt,ORP,SLP Dual Dual,Harlan 2-step,3.73,TA Civer,Wolfe 6-point,NX wet kit,Boyd Coddington Blasters 17/9.5,Weld Superlite skinnys & 15x10 w/ET Streets for the track
2000 Ram Air T/A,Black/Ebony,422,TH400,4200 stall,Patriot Performance StageIII,MTI S-1,9 inch 3.89,Wolfe 6-point,Weld Aluma Star skinny & 15x10s w/28s
Mustang Hat'r 2
12.38 @ 115.8 WITH A 2.06 60 FOOT w/heads old time was 12.71 @ 112.7 with a 60ft of 1.992 DA 2300, improved by ~.33 sec in ET and ~3.1 mph
Mustang Hat/r2
2000 BLK TA M6
PATRIOT 5.3L STAGE 2 HEADS
TR224/224 112LSA, HOOKER LT & ORY PIPE, SHITMASTER CATBACK, CARTEK CLUTCH, STRANGE 12 BOLT WITH 4.11, BMR SUSPENSION
11.87 @ 116.65 WITH A 1.70 60 FOOT +1400 DA
4thGenRetard
391hp/378Tq
Patriots LS1 II's with MTI SS1 (220/220 .581/.581 115 lsa)
Still need updated tuning though, I think I can break 400+
No track time yet but very low 12's on G-Tech Pro.
2001 Z28-A4
WOT
2001 Black WS6
Patriot 5.3, stage 2's/ TSP 231/237/598/595/112 Electric water pump/ asp pulleys/ TSP ported throttle body/ TSP lid/ Spec Stage 3/ SLP headers and y
446 RWHP
408 RWTQ
V8maro
1999 Black Camaro SS M6 - Lethal SS, 232/228 .595/.588 112 LSA - Patriot Performance S2 5.3L heads - LS1 intake, stock manifolds, 345.1 RWHP, 322.4 RWTQ - After H/C & Tune on a mustang dyno.
I think there are some impressive results listed.
#2
TECH Apprentice
Join Date: Feb 2002
Location: tega cay, SC
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Re: Patroit Heads and Cam Users Post your rwhp & 1/4 mile data
where are ur times?? oh yeah...its the dead of summer thats right...they will post them when they get them.
#3
TECH Apprentice
Join Date: Dec 2001
Location: Waldorf, Maryland
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Re: Patroit Heads and Cam Users Post your rwhp & 1/4 mile data
Mine are on - but I am not running the car at the track until I get it tuned and check the A/F ration. Spent too much money over the past 3-4 months to risk it.
#7
11 Second Club
iTrader: (13)
Join Date: Jun 2002
Location: The Confederacy
Posts: 3,063
Likes: 0
Received 0 Likes
on
0 Posts
Re: Patroit Heads and Cam Users Post your rwhp & 1/4 mile data
I have the dyno numbers in the sig.. since then I have added an ASP pulley, Thunder racing ported TB, Yella Terra Rockers, and a cutout.. so I should be WELL over the 403rwhp I dyno'd before, I'm hoping to hit 420rwhp with the TR220 cam since I have added more bolt ons. I'm going to dyno again with the new mods on Aug 30 at the Bama Mafia Dyno day. And btw.. my car will NOT be at the track until it cools off some down here.
Trending Topics
#8
TECH Fanatic
iTrader: (4)
Join Date: May 2003
Location: Commerce, MI
Posts: 1,563
Likes: 0
Received 0 Likes
on
0 Posts
Re: Patroit Heads and Cam Users Post your rwhp & 1/4 mile data
My car is an M6, FWIW: this was on a mustang dyno. My car is STOCK except lid & H/C, even down to the manifolds. (yuk)
Yes, the car was tuned, gained 26rwhp from the tune alone.
The car is choaking right now, with a new exhaust, LS6 intake, pulley, and some other small things I should see some great #'s
-Steve
Yes, the car was tuned, gained 26rwhp from the tune alone.
The car is choaking right now, with a new exhaust, LS6 intake, pulley, and some other small things I should see some great #'s
-Steve
#9
TECH Apprentice
Join Date: Dec 2001
Location: Waldorf, Maryland
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Re: Patroit Heads and Cam Users Post your rwhp & 1/4 mile data
Terry - call up Tempest Racing in Waldorf and give them some money to actually open on a Saturday and I will actually be able to dyno w/ all the boltons. Only place in the area and they wont open up on the weekend. Help a brother out - lol.
#11
TECH Apprentice
Join Date: Dec 2001
Location: Waldorf, Maryland
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Re: Patroit Heads and Cam Users Post your rwhp & 1/4 mile data
I'll call them.Maybe they will open up.
Now where is Evil? Just gotta get him on board with the EDIT. He is the guru.
#12
TECH Veteran
iTrader: (2)
Join Date: Nov 2001
Location: Warsaw, Va
Posts: 4,316
Likes: 0
Received 0 Likes
on
0 Posts
Re: Patroit Heads and Cam Users Post your rwhp & 1/4 mile data
Terry - call up Tempest Racing in Waldorf and give them some money to actually open on a Saturday and I will actually be able to dyno w/ all the boltons. Only place in the area and they wont open up on the weekend. Help a brother out - lol.
Lemme know when you hit the dyno... i need to get on the friggin dyno and show all my 300hp
#13
FormerVendor
iTrader: (8)
Join Date: Dec 2001
Location: Melbourne, FL
Posts: 2,179
Likes: 0
Received 0 Likes
on
0 Posts
Re: Patroit Heads and Cam Users Post your rwhp & 1/4 mile data
Mine are on with full boltons, TSP 228R and a 6 speed. I have to work out the tune with the SVO 30# injectors asap. Untuned it pulls damn hard. Can't wait to get some tuning done.
#14
Re: Patroit Heads and Cam Users Post your rwhp & 1/4 mile data
So far we have:
V8maro
1999 Black Camaro SS M6 - Lethal SS, 232/228 .595/.588 112 LSA - Patriot Performance S2 5.3L heads - LS1 intake, stock manifolds, 345.1 RWHP, 322.4 RWTQ - After H/C & Tune on a mustang dyno.
Gomer
2002 M6 Z28. B&B triflow, Spec Stage III clutch, TR220 cam kit,Patriot Stage II 5.3 heads, Jet hot coated Hooker long tubes and MTI lid with filter. 403 rwhp 384 rwtq
Let's keep the data coming.
V8maro
1999 Black Camaro SS M6 - Lethal SS, 232/228 .595/.588 112 LSA - Patriot Performance S2 5.3L heads - LS1 intake, stock manifolds, 345.1 RWHP, 322.4 RWTQ - After H/C & Tune on a mustang dyno.
Gomer
2002 M6 Z28. B&B triflow, Spec Stage III clutch, TR220 cam kit,Patriot Stage II 5.3 heads, Jet hot coated Hooker long tubes and MTI lid with filter. 403 rwhp 384 rwtq
Let's keep the data coming.
#15
11 Second Club
Join Date: Nov 2001
Location: Hanover MD
Posts: 1,645
Likes: 0
Received 0 Likes
on
0 Posts
Re: Patroit Heads and Cam Users Post your rwhp & 1/4 mile data
hd why dont we let will flag us next week after the "crayon box" is complete on the little m6?
i promise i wont spray more than a 200 shot.
i promise i wont spray more than a 200 shot.
#16
TECH Apprentice
Join Date: Dec 2001
Location: Waldorf, Maryland
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Re: Patroit Heads and Cam Users Post your rwhp & 1/4 mile data
hd why dont we let will flag us next week after the "crayon box" is complete on the little m6?
i promise i wont spray more than a 200 shot.
i promise i wont spray more than a 200 shot.
#18
TECH Enthusiast
iTrader: (24)
Re: Patroit Heads and Cam Users Post your rwhp & 1/4 mile data
I ran a 12.71 @ 112.7 with a 60ft of 1.992 DA 2300
I ran the time in my sig. with a DA of 2390 not sure how much better I would have ran but it kept sprinkling on and off that night I put the car so far side ways on the 2-3 shift I almost taged the wall. I made no change to the car other than the heads even was runnig on my cam tune, just bolted them on got about 200 miles on them than went to the track. I still dont have a LS6/X intake, ported TB or under drive pully I figure with those mods and some ET streets I should go vary low 11's if it stays together. And you cant bet there customer service by far the best I have delt with or even heard about
I ran the time in my sig. with a DA of 2390 not sure how much better I would have ran but it kept sprinkling on and off that night I put the car so far side ways on the 2-3 shift I almost taged the wall. I made no change to the car other than the heads even was runnig on my cam tune, just bolted them on got about 200 miles on them than went to the track. I still dont have a LS6/X intake, ported TB or under drive pully I figure with those mods and some ET streets I should go vary low 11's if it stays together. And you cant bet there customer service by far the best I have delt with or even heard about
#19
Re: Patroit Heads and Cam Users Post your rwhp & 1/4 mile data
So far we have:
ET 1/4 mile
Mustang Hat'r 2
12.38 @ 115.8 WITH A 2.06 60 FOOT w/heads old time was 12.71 @ 112.7 with a 60ft of 1.992 DA 2300, improved by ~.33 sec in ET and ~3.1 mph
Dyno Data:
V8maro
1999 Black Camaro SS M6 - Lethal SS, 232/228 .595/.588 112 LSA - Patriot Performance S2 5.3L heads - LS1 intake, stock manifolds, 345.1 RWHP, 322.4 RWTQ - After H/C & Tune on a mustang dyno.
Gomer
2002 M6 Z28. B&B triflow, Spec Stage III clutch, TR220 cam kit,Patriot Stage II 5.3 heads, Jet hot coated Hooker long tubes and MTI lid with filter. 403 rwhp 384 rwtq
Let's keep the data coming.
ET 1/4 mile
Mustang Hat'r 2
12.38 @ 115.8 WITH A 2.06 60 FOOT w/heads old time was 12.71 @ 112.7 with a 60ft of 1.992 DA 2300, improved by ~.33 sec in ET and ~3.1 mph
Dyno Data:
V8maro
1999 Black Camaro SS M6 - Lethal SS, 232/228 .595/.588 112 LSA - Patriot Performance S2 5.3L heads - LS1 intake, stock manifolds, 345.1 RWHP, 322.4 RWTQ - After H/C & Tune on a mustang dyno.
Gomer
2002 M6 Z28. B&B triflow, Spec Stage III clutch, TR220 cam kit,Patriot Stage II 5.3 heads, Jet hot coated Hooker long tubes and MTI lid with filter. 403 rwhp 384 rwtq
Let's keep the data coming.