Ms4 and Procharger
09-07-2008, 09:10 PM
#1
11 Second Club
Thread Starter
iTrader: (20)
Join Date: Mar 2005
Location: J.C.
Posts: 575
Likes: 0
Received 0 Likes
on
0 Posts
Ms4 and Procharger I know i'll have better power/drivabilty with a blower cam but for now how would this cam work with about 6-8lbs of boost? My motor is a Tsp 370 with ms4, stg2.5 ls6 heads, H beam rods, stock crank, .040 mls gaskets, etc....
09-07-2008, 09:12 PM
#2
It will work. ANY cam will work. You will have to pulley up more than normal because that cam has a lot of overlap that will bleed boost. Run it with enough pulley for 8 spi and then get a more approipirate cam. you should pick up some good horse "pressure" after that 
