Dyno tune for my 355 Lt1 advice and inputs
#1
TECH Resident
Thread Starter
iTrader: (34)
Join Date: Nov 2008
Location: Satellite Beach, FL
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
Dyno tune for my 355 Lt1 advice and inputs
I'm stationed at whiteman AFB and live in warrensburg, mo 64093, I currently have a mail order tune from Ion Sultan:mad Z28 or madtuner now! I'm looking to get the max potential out of my car so would like to get a dyno tune....does anyone know of a good dyno tuner around this area, I would imagine kansas city of course, but not familiar with that area really! So hopefully someone has some experience with the local area and has some good input or advice on where I should go, thanks guys.
#4
TECH Resident
Thread Starter
iTrader: (34)
Join Date: Nov 2008
Location: Satellite Beach, FL
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
I appreciate it, thanks, The only thing that sucks about this base is the simple fact it's in the middle of no where. An hour and half to Kansas City and 3 and half hours to St.Louis....Hopefully someone on this badass forum has some experiance or knows someone around my area that knows LT1's. I would like to achieve the max potential out of my forged 355 Lt1 with a cc306 with pretty much every supporting mod available to the lt1 and 150 shot is what i would like to spray!
I need to make sure that my air/fuel ratio is good and to see if I need to bump from 32lbs up to around 40 some odd lbs! Of course it would be a perfect time to replace while I'm gettting the tune! It's fairly simple to swap out injector's so I would imagine that this wouldn't be that big of a deal to do it right there!
I need to make sure that my air/fuel ratio is good and to see if I need to bump from 32lbs up to around 40 some odd lbs! Of course it would be a perfect time to replace while I'm gettting the tune! It's fairly simple to swap out injector's so I would imagine that this wouldn't be that big of a deal to do it right there!