95T-A

I have decided to use crane gold rocker arms ,but I have heard of fitment issues with some springs. So my question is what valve spring do i run that will handle the lift of the cc503 ,and have no fitment issues. I have considered bullet cams vs 2700 springs ,but have also heard of those not fitting with the stock hardware like their suppose to. Kind of just want to settle these problems ,and know what to believe about them thanks everyone.

LSWHO

iTrader: (1)

as mentioned in the other spring thread the 10308-1 kit from crane is a good deal.

95T-A

Thats what I was thinking to but I thought I read somewhere that those wouldnt fit right correct me if im wrong because i I was wanting to run that kit.

LSWHO

iTrader: (1)

Never heard that. I was going to run them with the 503 cam. But I never did that cam so I have no personal experience only internet hearsay.

defaultexistence

iTrader: (11)

i hear nothing bad about some from here,
http://www.alexsparts.com/categories...2C-GEN-II-SBC/
i will be running some this month

RamAir95TA

iTrader: (2)

I ran the Crane 99893 springs (same in the 10308 kit) and Crane Gold 1.6 rockers for about 6 years on my cam-only setup with no clearance issues whatsoever.

95T-A

Thanks for the replys im gonna go with the crane kit.