Dynosim advanced
#1
Launching!
Thread Starter
iTrader: (6)
Join Date: May 2006
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Dynosim advanced
I just got dynosim advanced to play around with. Im trying to make a stock lt1 and i need to know a few things.
1. Flow bench numbers for stock heads and at vacuum those numbers are at.
2. induction flow
3. lifter acceleration
4. cam lob center angle
5. intake/exhaust centerline
6. IVO, IVC, EVO, EVC (at 0.050 inch lift)
Any cam info i need is at 0.050 inch lift. I might have more questions to come but this is all i can think of. Any help here would be great
1. Flow bench numbers for stock heads and at vacuum those numbers are at.
2. induction flow
3. lifter acceleration
4. cam lob center angle
5. intake/exhaust centerline
6. IVO, IVC, EVO, EVC (at 0.050 inch lift)
Any cam info i need is at 0.050 inch lift. I might have more questions to come but this is all i can think of. Any help here would be great