Ironxcross

iTrader: (8)

When you installed the TF elbow, did it fit flush with the throttle body or was it off slightly. No matter what I do I cannot get them to be flush. I'm just wondering if I'm the only one...

Ironxcross

iTrader: (8)

anyone?

jb442

iTrader: (4)

I have an aluminum elbow, similar to the TF unit, but I haven't even put it on the car yet since I'm having some other fitment issues with the SLP CAI. You can check it out here: https://ls1tech.com/forums/lt1-lt4-modifications/661764-slp-cai-fitment-lt1-warning.html. It might explain your alignment problem.

dafhturbo

iTrader: (3)

I HAVE THE TF ELBOW HAD TO TRIM A LITTLE ALUMINUM OFF THE END THAT GOES TO THE TROTTLE BODY. JUST ON THE CORNER. AFTER THAT EVERYTHING LINED UP LIKE I WANTED. NO PROBLEMS WITH LEAKING EITHER. i WOULD POST PICTURE, BUT OUT OF TOWN FOR WORK.

94FBIRD

iTrader: (5)

I cut about an inch off my Trick Flow on the MAF end to make it fit with my SLP CAI.

marc1130

iTrader: (20)

Mine fits, It does not line up perfectly, but the Flexible rubber tube seals and it works fine.

Schweet97Z

iTrader: (35)

dont cut off the elbow side. make sure you cut off the CAI side. it will be easier. its a typical problem and easy fix. i had to do the same thing

onephatZ28

iTrader: (8)

MY fit fine I have the bbk tb & K&N intake here is some pics hope they help.