Trans to bell housing bolts (NOT to block) size
#1
Teching In
Thread Starter
iTrader: (4)
Join Date: Oct 2009
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Trans to bell housing bolts (NOT to block) size
So I bought a bell housing for my t56 and I think the person I bought it from tried to install ARP studs into the bell housing that were the wrong thread size.
- Does the stock T56 use studs or bolts between the bell housing and the trans?
- What is the correct thread size for the threads on the bell housing? I am not talking about the M10x1.5 that thread into the block.
I would normally use a thread gauge to find out but I don't have the factory bolt and have no other source for reference
Please help!
Thanks
Berto
- Does the stock T56 use studs or bolts between the bell housing and the trans?
- What is the correct thread size for the threads on the bell housing? I am not talking about the M10x1.5 that thread into the block.
I would normally use a thread gauge to find out but I don't have the factory bolt and have no other source for reference
Please help!
Thanks
Berto