mr_biscuitz

iTrader: (22)

I have taken my trans out probably 6 times now and never had any issues but this time the quick connect line will not go back in for nothing. Was wondering if anyone has had this happen before and what they had to do to fix the problem. Thanks in advance for any help

blu byu EH

iTrader: (25)

I had this happen to me last summer. I used a pry bar and forced it in

black00ssFL

iTrader: (24)

Loosen the bleeder screw on the slave and try again.

mr_biscuitz

iTrader: (22)

Thats what Im going to try, hope it works.

theguyulove2hate

iTrader: (5)

+1. I used a pair of channel locks and pried against my header.

heavy6.0

iTrader: (69)

crack the bleeder it will go right in