3 and 4th gear grinding
#1
Staging Lane
Thread Starter
Join Date: Jul 2010
Location: Greenville, SC
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
3 and 4th gear grinding
Hey guys im new to this whole thing but i figure i'll get it a shot. I drive a 2002 z28 camaro (6 speed). My transmission wont go into 3rd or 4th gear and makes a horrifying grinding noise when you try to do so. I was told that is prob synchro's but i figured i'd get a few other inputs on it. what do ya'll think?
#2
Rebuild time
on these tranmission expectly on 00 up t56, they come with " not great " tranmission, and when ever 3-4 gear hard to get in, or grind, its time for rebuild. Some of the sponsor here will chim in, they are all good.
on these tranmission expectly on 00 up t56, they come with " not great " tranmission, and when ever 3-4 gear hard to get in, or grind, its time for rebuild. Some of the sponsor here will chim in, they are all good.
#3
TECH Enthusiast
iTrader: (1)
Yeah sure sounds like a rebuild time. I"m sure you have bad synchros or gears themselves, bent shift fork, pads...etc. I would have a steel 3-4 shift fork installed with some upgraded bronze pads while you have it apart. It isn't that much more and should help it last longer.