25699z28

iTrader: (1)

I upgraded my hydraulics and line in my trans am while my motor was out. I forgot to put the shaft back on the pedal and it is now wedged down under the edge of the dash. I cant seem to push the shaft in to get it up to where it clips on the pedal. is there a way to push that shaft in so i can get it up to where it goes on the pedal? anywhere i can relieve the pressure on that shaft? I already broke loose the bleeder on the transmission and that isnt doing anything. I hope i wasnt the only person to ever do this. Any help would be greatly appreciated. Thanks guys