Tried much, still cant pull 5th/6th cluster
#1
TECH Veteran
Thread Starter
iTrader: (12)
Join Date: Dec 2004
Location: Rockville, MD
Posts: 4,354
Likes: 0
Received 0 Likes
on
0 Posts
Tried much, still cant pull 5th/6th cluster
Heat, penetrating oil, voodoo.. still cannot pull it.
I keep breaking teeth off the gear and breaking the puller. Ideas?
theres no snap ring or anything holding it on so..
I keep breaking teeth off the gear and breaking the puller. Ideas?
theres no snap ring or anything holding it on so..
#2
TECH Fanatic
iTrader: (11)
Are you talking about the driven gear? If so it's possible the splines have worn into each other and would require a small twist in the opposite direction of normal tq. Mine was completely loose and slid off by hand so I cannot help too much. Maybe a really big snap-on puller at a shop?
#5
If so, clamping bearing puller upside down (so it's resting on the flat side rather than on the taper) under the gear and pressing the main shaft thru may work.