Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Line lock problem

Thread Tools
 
Search this Thread
 
Old 06-15-2015, 11:05 PM
  #1  
Registered User
Thread Starter
 
Ernesto1220's Avatar
 
Join Date: Feb 2015
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Line lock problem

Hey guys,
So I want to see if any of you guys have any input on this. I have a friend that has line lock on his car and after trying it for the first time he ran into an issue.
I guess after he tried it, when he left he had to give the car gas with clutch half way pressed down and not to where it's almost released. He turned the car off and on and that seemed to fix the issue. But now he says his gears go in a lot softer than they used to. It's not necessarily malfunctioning because the gears don't slip or anything it just feels too soft. Any idea what it can be?
Old 06-16-2015, 06:30 AM
  #2  
TECH Junkie
iTrader: (18)
 
ramairetransam's Avatar
 
Join Date: Aug 2005
Location: Amsterdam Ny, the good part
Posts: 3,389
Likes: 0
Received 63 Likes on 51 Posts

Default

sounds like clutch hydraulics , bleed the clutch first .
Old 06-16-2015, 07:28 AM
  #3  
KCS
Moderator
iTrader: (20)
 
KCS's Avatar
 
Join Date: Mar 2005
Location: Conroe, TX
Posts: 8,848
Received 307 Likes on 207 Posts

Default

Doesn't sound like it has anything to do with engine internals, probably clutch/hydraulics related.
Old 06-17-2015, 07:57 PM
  #4  
TECH Fanatic
iTrader: (2)
 
blackandgold's Avatar
 
Join Date: Mar 2009
Location: Austin
Posts: 1,389
Received 11 Likes on 9 Posts

Default

"have a friend"

+1 for a hydraulics issue



Quick Reply: Line lock problem



All times are GMT -5. The time now is 07:53 PM.