keliente

iTrader: (22)

Was doing the drill mod as a last resort before buying a new clutch.

I simply cannot get the quick connect fitting back into the transmission...it won't budge. I opened the bleeder screw (actually took it all the way out by accident) and this quick connect still won't get back in...

What am I doing wrong?

Thanks

Kelly

wrencher

iTrader: (2)

Check the clip on slave's recepiticale & make sure it's not damaged. Make sure the white release collor is om the line correctly also.

Griswold

iTrader: (5)

Same thing happened to me. I think I ended up putting a wrench around it and prying it against the car with a hammer. Eventually it just popped right in.