HotRod68Camaro

iTrader: (29)

This clutch has been sitting on the engine for about 13months now. The flywheel looks fine but i am not sure about the disc and pressure plate. On the last pic of the pressure plate you can see how it has been worn down a little. The clutch has about 4000 miles.

911ss

iTrader: (9)

only one pic works for me, the 1st one.

10SecDreamer

iTrader: (7)

iono looks fine to me?

brad8266

iTrader: (23)

looks ok to me, just looks like its been sitting a bit.

HotRod68Camaro

iTrader: (29)

yea, was just wondering whether i should replace it or just reinstall it.

Disturbed Bird

iTrader: (9)

reinstall it that rust will burn off will driving. it looks like its only surface rust to me.

WE TODD DID

iTrader: (2)

Its fine. Go back with it!

quiksilver9531

ram powergrip, man i hated that clutch, glad i got the ls7

0camaro1

iTrader: (1)

man put it back in go out side in the street, rev it till the valves float and side step it will be alright

HotRod68Camaro

iTrader: (29)

Thanks for all the feedback guys, saved me some money.

Dillard99

iTrader: (4)

What happend why is the clutch out

HotRod68Camaro

iTrader: (29)

got in an accident so had to pull everything out.

Dillard99

iTrader: (4)

If your still not sure your going to re-used that clutch you should send those pic's to www.Matt@specclutch.com (email) he's one of the tech guys there I also sended him some pic's of my stage3+ disk and pressure plate to be sure if its good or not he told me that my disk needed to be re-lined but everything was great hope that helps