Tranny Work for F/I?
#1
Teching In
Thread Starter
Join Date: Mar 2008
Location: St. Louis
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Tranny Work for F/I?
How many of you guys pushing 600+rwhp have gotten tranny work done after? What has been done specifically? Recommendations?
Thanks,
Jim
Thanks,
Jim
#2
11 Second Club
iTrader: (33)
Join Date: Apr 2006
Location: Chicago Area
Posts: 1,008
Likes: 0
Received 0 Likes
on
0 Posts
I'm not putting down quite that much but I am going with a Viper input shaft on my 4+ from Six Speeds Inc this year. I know they warranty that up to 700hp, (with a stock input). I'd think you might want the Viper output also.
Edit - Just noticed the Vette, not sure about the Viper conversion on that. I imagine it could be done but don't know for sure...
Edit - Just noticed the Vette, not sure about the Viper conversion on that. I imagine it could be done but don't know for sure...
#3
Teching In
Thread Starter
Join Date: Mar 2008
Location: St. Louis
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
I'm not putting down quite that much but I am going with a Viper input shaft on my 4+ from Six Speeds Inc this year. I know they warranty that up to 700hp, (with a stock input). I'd think you might want the Viper output also.
Edit - Just noticed the Vette, not sure about the Viper conversion on that. I imagine it could be done but don't know for sure...
Edit - Just noticed the Vette, not sure about the Viper conversion on that. I imagine it could be done but don't know for sure...
#7
Teching In
Thread Starter
Join Date: Mar 2008
Location: St. Louis
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts