Shawn MacAnanny

iTrader: (12)

The transmission has had fluid in it before and it was drained and i just never filled it because i didnt want any to leak out since i dont have my driveshaft yet. Ive been idling and reving the engine getting everything all finished and up it just now occured to me that it could be a problem with my T56. It's been in nuetral the entire time, never run for more than 10 minutes at a time. I'm sure there is some fluid left in it from it being drained before as its not a brand new transmission.

I know when it was in nuetral and the engine spinning the output shaft still spins but when engine is off i can spin it by hand freely. I've not heard any crazy noises, transmission never felt warm, goes into gears perfectly smoothly.

CW00BlackTA

iTrader: (31)

I think you'll be fine.

ls1 joe

iTrader: (37)

As long as there is no load (no driving around and not an hour of running) you should be fine. 10 minutes I can't see doing any damage.

Amber

Shawn MacAnanny

iTrader: (12)

Thank you! That's great to hear.

wrencher

iTrader: (2)

Only thing turning is the input & counter shaft, but you prolly are OK.

Shawn MacAnanny

iTrader: (12)

I filled it up today, took less than 3.5qts of mobile 1 atf so i assume there was about a half quart left in there. I also noticed that when in gear the output shaft slightly wobbles. Not hardly at all but i could notice a slight wobble, is that normal?

CW00BlackTA

iTrader: (31)

Yes, normal.

Shawn MacAnanny

iTrader: (12)

Alright, Awesome!