Vicinity

iTrader: (7)

Ok, so today I was driving around all gears worked, including reverse. I went to work for like 10 hours, and my reverse didn't work, I had to push my car backward out of the parking space. I drove around for a while and my gears became harder to shift and reverse still didn't work.

What's wrong? Can anyone help, I really hope I don't need a new one.

(Yes I posted this exact thing in the manual section, sorry but this car is my DD and I need info asap, sorry.)

99345hp

sounds like something in the hydrolics for the clutch.

Vicinity

iTrader: (7)

Is that something I could fix myself?

Vicinity

iTrader: (7)

I let it set again and it works. Weird, anything I can do to prevent that?

jomomma

iTrader: (39)

check the wiring under the car. make sure the rev lockout solenoid is connected good. if you have longtubes make sure the o2 wires arent getting burnt. i had an o2 wire touch the header and it popped the fuse under the hood the worked the rev lockout solenoid and the o2`s.

formula87

iTrader: (2)

^^^^check rev lockout selonoid but if other forward gears are hard first check the slave cyl and the reservoir.

the_merv

iTrader: (88)

Check the Wiring and the Reverse Lockout Solenoid.. then start looking into the Hydraulics.