Need tig welder in Chicago.
#1
10 Second Club
Thread Starter
iTrader: (22)
Join Date: Mar 2006
Location: Northwest side of Chicago
Posts: 3,677
Likes: 0
Received 2 Likes
on
2 Posts
Need tig welder in Chicago.
I have a small crack developing on my turbo manifold that i want to tig up before in starts to leak. Its in an easy spot on the top of the manifold and im pretty sure can be fixed with out taking it off the car. Is there anyone around Chicago that i could drive my car to when its nice out and have that welded up? Shoot me a pm and a price.
Alex
Alex
#3
10 Second Club
Thread Starter
iTrader: (22)
Join Date: Mar 2006
Location: Northwest side of Chicago
Posts: 3,677
Likes: 0
Received 2 Likes
on
2 Posts
The drilling of the ends wont be a problem, the part that is cracking is right on top and very easy to get to with the fuel lines and the coil pack off on the driver side. I know how to weld just dont have a welder.
Thanks for the heads up.
Thanks for the heads up.
Trending Topics
#8
Motorboater
iTrader: (53)
ok i'll call you bro.
shouldn't be a big deal, can do it with the part on the sled, i'll bring it by on the trailer. just a 1/4" hole in a tube in the heat exchanger on the back, had a little incident with a nasty wheelie last weekend and dragged the back end on the ground kinda hard
shouldn't be a big deal, can do it with the part on the sled, i'll bring it by on the trailer. just a 1/4" hole in a tube in the heat exchanger on the back, had a little incident with a nasty wheelie last weekend and dragged the back end on the ground kinda hard
#10
Motorboater
iTrader: (53)
oh yah, its extremely accessible, nothing will be in the way at all. i'll remove the gas tank repair putty i put on it. its not leaking while it runs on the trailer but i don't trust that **** permanently. we like to cross open water out on the chain/fox river and last thing i need is it popping loose half way through a 400 foot water hole