Who runs 10's with juice in a m6 without heads or ported heads?
03-15-2004, 03:06 PM
#1
Teching In
Thread Starter
Join Date: Feb 2004
Location: State College, PA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Who runs 10's with juice in a m6 without heads or ported heads? Just as the title states, I wanna see what it takes with a 150 shot to run 10's. I was thinking about the g5x3 cam, 150 shot, lsx intake, flp long tubes, mufflex cat back, and 12 bolt should do it?
03-15-2004, 10:09 PM
#6
I got down to 11.38 - totally stock engine to include stock heads and cam - on a 100 shot of TNT. Good suspension. DA was at +4500 - heat of the 4th of July weekend.
Can it be done on a totally stock engine? I'll never find out, just put heads and cam in the SS. But with a cam, I have no doubt it can be done, espcially at sea level.
David
Can it be done on a totally stock engine? I'll never find out, just put heads and cam in the SS. But with a cam, I have no doubt it can be done, espcially at sea level.
David
03-15-2004, 10:38 PM
#7
Staging Lane
Join Date: Jun 2002
Location: Nowhere
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
2001 Camaro SS - Stock heads
Mods -
Lid
Ported Tbody
Fernco
224/230 cam
Pacesetter Long tubes w/ypipe
Hooker Catback w/cutout open
BMR LCA's
Hal 12ways
Spec Stage 3
NX 150 shot
26/10.5 ET Street on firebird rims
Draglite fronts
Times -
60ft - 1.52
1/8 - 6.93
1/8mph - 100.91
1000ft - 8.88
1000mpg - 116.03
The car is sold now...but I ran that time in Novemeber of 2003. We don't have 1/4 tracks here, only have 1000ft tracks. My time converts to roughly a 10.7-10.8.
Mods -
Lid
Ported Tbody
Fernco
224/230 cam
Pacesetter Long tubes w/ypipe
Hooker Catback w/cutout open
BMR LCA's
Hal 12ways
Spec Stage 3
NX 150 shot
26/10.5 ET Street on firebird rims
Draglite fronts
Times -
60ft - 1.52
1/8 - 6.93
1/8mph - 100.91
1000ft - 8.88
1000mpg - 116.03
The car is sold now...but I ran that time in Novemeber of 2003. We don't have 1/4 tracks here, only have 1000ft tracks. My time converts to roughly a 10.7-10.8.
Trending Topics
03-16-2004, 06:14 AM
#9
TECH Senior Member
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ragtop 99
Fireball ran 10s on the spray. I think he had a 221/221 cam at the time. A strong rear and hefty clutch are definitely needed.
yup. went 10.83 @ 129.4 back in the day with a B1 cam/stock heads on a 150 shot. Had a 10-bolt with 3.73s and mcleod clutch. my 10-bolt was reinforced with crossbracing and whatnot...but it did break 2 runs later
