fly boy_1

iTrader: (4)

Anybody have any pics of where they mounted the LNC control box, and where they routed the two big wire harnesses that plug into the coil packs? Is there a hole in the firewall already that I can use or will I have to do some cutting? I think I have my head wrapped around the wiring I just would like to see where I can mount everything up without making things more difficult than necessary.

87silverbullet

iTrader: (11)

I mounted the box on the inner fender on the passengers side and just plugged up the connectors.

scantone1

iTrader: (2)

The harness is not long enough to go thru the firewall from what I tried. So I cut it added about a 2 foot of wire and installed in the glove box. Wish they would make the harness a few feet longer took a few extra hours extending all those wires

fly boy_1

iTrader: (4)

Yeah thats what I was afraid of, I guess it'll be easier running activation wires into the cabin vs the harness out. Any pics of your install silver bullet?

DopeFedZ

iTrader: (34)

Dont have a pic at the moment but mine is mounted where the radio used to be. I made a hole in the firewall near the back of the intake.

HCI2000SS

iTrader: (2)

Got mine mounted on the passenger side inner fender area as well

JDEP162

mines mounted same as this^^^ il throw up a few pics 2mrow after work. i just ran the harness along bottom of the cowl. mine aint a show winner but il post it

DopeFedZ

iTrader: (34)