Maximizer 4 and PCM pinout question
07-07-2015, 07:21 PM
#1
Teching In
Thread Starter
Maximizer 4 and PCM pinout question I am trying to confirm if I got the right pinout/wires for the max 4 nitrous controller.
Red PCM connector
VSS pin #55 (green/white) wire
Blue PCM connector
TPS pin #12 (dark blue) wire
Tach pin #35 (white) wire
This is for a 98 Camaro PCM.
Thanks
Red PCM connector
VSS pin #55 (green/white) wire
Blue PCM connector
TPS pin #12 (dark blue) wire
Tach pin #35 (white) wire
This is for a 98 Camaro PCM.
Thanks
07-07-2015, 08:29 PM
#2
Teching In
Join Date: Nov 2008
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
#55 (DK GRN/WHT) should be the VSS output signal on the Red Connector C1
#12 (DK BLU) Should be TPS on the blue connector C2
#35 (WHT) Is your Tach signal on the Blue connector C2
Just make sure its a 98 pcm and harness because 99-02 is completely different.
#12 (DK BLU) Should be TPS on the blue connector C2
#35 (WHT) Is your Tach signal on the Blue connector C2
Just make sure its a 98 pcm and harness because 99-02 is completely different.
07-07-2015, 08:37 PM
#3
Teching In
Thread Starter
Again I really appreciate your help
07-11-2015, 08:27 PM
#5
Teching In
Thread Starter