Dry Nitrous without MAF
#2
8 Second Club
iTrader: (13)
You could fatten the fuel via the PE table.
Would have to set it on the Dyno.
Would affect non nitrous hp since you would be fat when NA.
Could trick the PCM somehow via IAT and a relay for adding extra fuel
Challenge is that you will end up with a set fuel amount when in PE mode.
It would not compensate for actual nitrous flow (bottle pressure becomes really important)
Would have to set it on the Dyno.
Would affect non nitrous hp since you would be fat when NA.
Could trick the PCM somehow via IAT and a relay for adding extra fuel
Challenge is that you will end up with a set fuel amount when in PE mode.
It would not compensate for actual nitrous flow (bottle pressure becomes really important)