Project SS!!!!!!
#1
Project SS!!!!!!
i bought the car year ago.it had really bad paint-job on it.single stage.so i decided to bring her back to life sense i go to school for auto body.as of right now half of the car is primed.had to do a lots of stripping to get that shitty *** paint off.quarter panels i had to take down to the factory primer.i will give more info and add more pics as the progress takes place.
FIRST DAY.HAD TO HAND BLOCK EVERYTHING WITH 80 GRIT DUE TO BAD PAINT JOB.
STRIPING DOWN THE BACK BUMPER COVER
HAD TO WET-SAND 220 BECAUSE I DIDN'T WANT IT TO DIG INTO THE SMC.TURNED OUT PRETTY GOOD.
PRIMED THE QUARTERS.3 NICE HEAVY COATS
PRIMED THE OTHER PIECES
PRIMED THE AIR LID.
THIS IS WHAT GOING TO BE ON THE AIR LID.
this is it for now.feel FREE throw in your two cents in.lol
FIRST DAY.HAD TO HAND BLOCK EVERYTHING WITH 80 GRIT DUE TO BAD PAINT JOB.
STRIPING DOWN THE BACK BUMPER COVER
HAD TO WET-SAND 220 BECAUSE I DIDN'T WANT IT TO DIG INTO THE SMC.TURNED OUT PRETTY GOOD.
PRIMED THE QUARTERS.3 NICE HEAVY COATS
PRIMED THE OTHER PIECES
PRIMED THE AIR LID.
THIS IS WHAT GOING TO BE ON THE AIR LID.
this is it for now.feel FREE throw in your two cents in.lol
Last edited by 98camarols1; 07-22-2012 at 10:37 PM.
#4
BLOCKED THE SAIL AND QUARTERS PANELS WITH 180.GOING TO REPRIME THEN 320 IT THEN 600.USUALLY U HAVE TO PRIME IT ONCE AND 320 IT AND 600 BUT SENSE MY PAINT WAS IN BAD SHAPE ITS GOOD IDEA TO PRIME IT TWICE.
SAME THING FOR ALL THE OTHER PANELS
I SHAVED THE BOW-TIE EMBLEM.PLANNING ON LEAVING IT, OR AIR BRUSHING THIS CUSTOM EMBLEM ON IT.
SAME THING FOR ALL THE OTHER PANELS
I SHAVED THE BOW-TIE EMBLEM.PLANNING ON LEAVING IT, OR AIR BRUSHING THIS CUSTOM EMBLEM ON IT.
Last edited by 98camarols1; 07-22-2012 at 10:38 PM.
#7
PRIMED REST OF THE CAR
BOTH OF THE ROCKER PANELS HAD FEW BAD DENTS.
BLOCKED EVERYTHING WITH 180.READY FOR RE-PRIME.
HERE IS ONE OF THE SAMPLES OF CUSTOM PAINT.IT'S BAYSIDE BLUE METALLIC AS BASECOAT MISTED BLUE ICE PEARL(HOUSE OF KOLOR) ON TOP.WHAT YOU GUYS THINK?
NOW THIS IS THE JUST THE BAYSIDE BLUE METALLIC BASECOAT WITHOUT THE BLUE ICE PEARL.
SHOULD I DO THE BLUE ICE PEARL ON TOP OR JUST STICK WITH BAY-SIDE BLUE METALLIC COLOR.
BOTH OF THE ROCKER PANELS HAD FEW BAD DENTS.
BLOCKED EVERYTHING WITH 180.READY FOR RE-PRIME.
HERE IS ONE OF THE SAMPLES OF CUSTOM PAINT.IT'S BAYSIDE BLUE METALLIC AS BASECOAT MISTED BLUE ICE PEARL(HOUSE OF KOLOR) ON TOP.WHAT YOU GUYS THINK?
NOW THIS IS THE JUST THE BAYSIDE BLUE METALLIC BASECOAT WITHOUT THE BLUE ICE PEARL.
SHOULD I DO THE BLUE ICE PEARL ON TOP OR JUST STICK WITH BAY-SIDE BLUE METALLIC COLOR.
Trending Topics
#18
On The Tree
iTrader: (3)
Join Date: Jul 2010
Location: Orlando, FL
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Stick with the base blue, the ice is a little too much if you ask me. That color is going to stand out enough, adding the ice takes away from the color. An SS camaro has enough aggression and curves from the factory that you don't need to go crazy with paint and graphics to make them look really clean.