mikecobra95

iTrader: (3)

Category: Engine - Power Adders
Price: $0
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): TX
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6, Small Block
LS Engine?: Fits LS Engine

I am scrapping my dreams of rebuilding my Camaro so this is up for sale!

Eagle 4340 Competition Rotating Assembly

Eagle 4340 Forged LS1 4.0" Crankshaft
Eagle 4340 H-beam Rods w/ ARP 8740 bolts
7 Probe pistons - 1 was trashed when a valve dropped.
383 cubic inches w/ 3.905 (Aluminum block) or 408 with 4.030 Iron Block

I ran this as a 383 stroker and it ran GREAT! The assembly had only 8K miles on it when the valve dropped. The short block was torn down by a local machine shop and the crank and rods all checked out just fine. 7 of the pistons are in good shape and can be re-used. Just need to replace the 1 that was trashed.

I paid $2k for this assembly. Best offer gets it. Shipping at buyers cost. Let's make a deal!!!!

I am located in DFW Texas.

Thanks!

mikecobra95

iTrader: (3)

383 with the LS1 block, 408 in the 6.0 block, but that does require different pistons obviously. Just wanted to make that clear

jason02Z

iTrader: (10)

whats the compression.. and are they just a flat top piston

ross.cottrill

iTrader: (7)

i have a set of 4 inch bore stroker pistons for this rod and crank setup to help complete the rotating assembly...sorry op just trying to help out..

twgoodspeed

iTrader: (22)

will the crank work in a ls2 and i wonder how much just for crank

Rtzracer

iTrader: (8)

Interested in crank and rods. What kinds price?

mikecobra95

iTrader: (3)

Hey everyone....... The guy that is putting a deposit down on my 1998 Z28 roller has asked for all the parts I have to be included in the deal as well. If this goes through today the rotating assembly will be considered sold. If not and no deposit is paid today, I will answer all PM's and take the offers in the order they came in on this kit.

Only fair way I know how to do it. I had offers between $800 and $1k. SO obviously $1K wins I will keep you all posted. Thanks so much!

Rtzracer

iTrader: (8)

Any updates?

Rtzracer

iTrader: (8)

Ross, how much for the pistons? brand?

mikecobra95

iTrader: (3)

Deposit was officially received last night on my Roller with these parts. If it falls through i will let you all know asap. Thanks again

Slamedcam

will it work in a 5.3L block lmk 865-363-3758 thanks TJ

mikecobra95

iTrader: (3)

Sorry guys, I responded to PM's but never posted back in here. This kit is gone, it was sold with my roller. Thanks! I will have more parts to list tonight! So keep looking.....