LS1 Comp Cam (227 223 .614 .610 115) 80lb Seimens Injectors, ARP Head Bolts, LS1 MAF
#1
On The Tree
Thread Starter
iTrader: (5)
Join Date: Mar 2010
Location: Dallas, TX 75287
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
LS1 Comp Cam (227 223 .614 .610 115) 80lb Seimens Injectors, ARP Head Bolts, LS1 MAF
Category: Engine - Intake/Fuel
Price: $200
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): TX
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine
LS1 Comp Cam
I got a Custom Comp Cam that has around 5,000 miles on it.
It was installed in a fresh motor with NEW cam bearings... I changed my set up a few months ago and put in a larger cam... (231 239 etc...)
This cam is 1000% PERFECT. NEVER dropped, doesn't have any nicks or cracks, and the cam sprocket was TORQUED to spec on it. (Not impacted!)
The journals and lobes are perfect. NO imperfections.
Price is $220 SHIPPED to the 48 states.
Here's the cam card:
LS1 80lb Seimens Injectors for factory PCM
I also have a set of 80lb Siemens injectors to be run on FACTORY Ls1 computer (I dont remember if they are high or low impedance?)
I bought them brand new about 1 1/2 years ago. They have between 4,000-8,000 miles on them... I barely drive my car so no idea. They have been run on factory LS1 rails and powered by a factory LS1 PCM. they are flawless! The car has always had a -6AN "Fuel Filter" filtering the fuel system. They have NO trash in them.
When I removed them I held both ends with my fingers (So no trash enters them) and cleaned them with carb cleaner and dried them well.
Im going E85 so these aren't big enough!
there is NOTHING wrong with them.
$250 SHIPPED to the USA.
LS1 ARP Head Bolts
I have some used ARP head BOLTS. They ALL have the washers on them and none of them have damaged threads. They have always been torqued to spec. NEVER impacted.
No damage whatsoever. They have been "tightened" about 2 full "Times" to spec.
$70 SHIPPED.
LS1 MAF and random Piping
This was for my all motor set up before I went turbo.
No idea how to sell this thing... I never really tried either though...
it consists of LS1 MAF a bunch of t-bolts and silicone couplers and the 90 degree at the end is supposed to go to a FAST 102 throttle body.
$80-100 shipped? ???