FS/FT:Part out or Whole package Silver 98 Z28
08-03-2013, 12:34 PM
#1
FS/FT:Part out or Whole package Silver 98 Z28 Category: Racing Parts
Price: $1
Part Fits: 93-02 Chevrolet Camaro
Location (State): GA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine
The body is nice, a few small scuff's here and there, mostly stock, wire tuck, line lock, !ABS, !bumper support, power windows, keyless entry, and grey leather T/A seats. Harness and PCM included, 6 speed car with a clean and clear title and GTO wheels, T-tops dont leak and the A/C is still in tact and working. $1500, can deliver within reasonable distance or a small fee.
'04 GTO shortblock with 42K miles, 241 heads yellow springs w/15k miles, and LS2 intake - $1500 (can add different heads/cam if buyer so desires...Im a comp dealer) I have an 07 Z06 cam not installed to go with it. Was going to throw it and some BTR SLR lifters in it upon install.
'01 SS T56, factory hurst shifter - $1500
Black powder coated Weld Pro stars (15x4 and 15X8) with used for 3 passes 275/60 GY radials - $800 - Brakes on the stock 3.42 10 bolt have been ground to clear these.
The headers and exhaust go together to make the best street setup (imo). V bands on headers to ORY, then 3" in to 4" out Flow merge to 4" E cutout, then V bands to stock axle back. Close for the street, open for fun. Setup for M6 tranny X member
Kooks 1-7/8" race LT's - $700
ORY/E-cutout/stock over the axle for M6 and Kooks - $250
Im sure Im leaving some stuff out, but this can quickly become a nice car for someone if they have a weekend or two. I wont have time till November/December. I could potentially trade the Camaro body for a black Firebird or T/A body. Im also in need of a long bed for a 94-02 Dodge, white preferably. Will make a killer deal if someone wanted it all. Would definitely trade for a Kawasaki 636 (03-04 preferably) or similar.
For reference, the car as it looked when I got it. No grill and different wheels now.
Last edited by Jenson; 08-04-2013 at 10:24 AM.
08-22-2013, 10:50 AM
#6
Rear drag wheels are gone. This car is about to get put back together. Daily driver with A/C!! I'd absolutely love to trade the body for a black Bird, any type but a V6 body is ideal. For insurance reasons...I can only have 4 cars on my policy...
Trending Topics
08-22-2013, 02:18 PM
#8
There's such a thing as a clean, clear titled, running 6 speed 98 Z for $1500
The body is nice, a few small scuff's here and there, mostly stock, wire tuck, line lock, !ABS, !bumper support, power windows, keyless entry, and grey leather T/A seats. Harness and PCM included, 6 speed car with a clean and clear title and GTO wheels, T-tops dont leak and the A/C is still in tact and working. $1500, can deliver within reasonable distance or a small fee.
$1500 obo gets that roller, its ready for my engine and T56 to drop in.
I should have 3 Spec clutches ( stage 2, 3, and 5) in my possession by mid next week. Probably take a couple weekends to put it all back together with my limited schedule. That time should be used to finish my firebird though and not this. I'm totally fine with lowballers, trades, and whatever too. All I can do is say no
The body is nice, a few small scuff's here and there, mostly stock, wire tuck, line lock, !ABS, !bumper support, power windows, keyless entry, and grey leather T/A seats. Harness and PCM included, 6 speed car with a clean and clear title and GTO wheels, T-tops dont leak and the A/C is still in tact and working. $1500, can deliver within reasonable distance or a small fee.
$1500 obo gets that roller, its ready for my engine and T56 to drop in.
I should have 3 Spec clutches ( stage 2, 3, and 5) in my possession by mid next week. Probably take a couple weekends to put it all back together with my limited schedule. That time should be used to finish my firebird though and not this. I'm totally fine with lowballers, trades, and whatever too. All I can do is say no 
09-09-2013, 06:19 AM
#13
Need to sell all this asap...never ending baby momma drama.
Rolling chassis - $1000
Engine - complete longblock (217/221 LsL lobe 112lsa with pac 1519's, comp p'rods), new LS3 lifters and trays - $2000
Front Pro stars - $300
Headers - $700
ORY setup - $250 or $850 headers/ORY
T56 w/bellhousing - $1500
Rolling chassis - $1000
Engine - complete longblock (217/221 LsL lobe 112lsa with pac 1519's, comp p'rods), new LS3 lifters and trays - $2000
Front Pro stars - $300
Headers - $700
ORY setup - $250 or $850 headers/ORY
T56 w/bellhousing - $1500
