* SOLD SOLD ** GM LSA fully assembled heads 12626958 *PAIR NEW IN BOX* LS2 LS3 LSX
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Feb 2010
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
* SOLD SOLD ** GM LSA fully assembled heads 12626958 *PAIR NEW IN BOX* LS2 LS3 LSX
Category: Accessories
Price: $0
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): NE
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine
These heads will work on any 4" or larger bore LS blocks ( 6.0L 6.2 LS2 LS3 )
This is the CTS-V 6.2L production cylinder head assembly. It is designed with high-strength aluminum casting for supercharged application. It features premium steel intake and exhaust valves.
Completely Assembled.
Specifications:
• L92-style Intake Ports
• 68cc Combustion Chamber
• 2.16'' Steel Intake Valve / 1.59'' Steel Exhaust Valve
made with a premium A356T6 alloy that offers excellent heat resistance, particularly in the bridge area of the cylinder head, between the intake and exhaust valves. Additionally, each head is manufactured with a roto-casting method.
Also known as spin casting, the roto-casting process involves pouring the molten alloy into a rotating mold, for a more even distribution of the material that virtually eliminates porosity -- air bubbles or pockets trapped in the casting -- for a stronger finished product.
For optimal combustion, the cylinder heads feature swirl-inducing wings cast into the intake ports, improving the mixture motion of the pressurized air/fuel charge. The gatekeepers of the heads' combustion chambers are large-diameter, 2.16-inch (55 mm) intake valves and 1.59-inch (40.4 mm) exhaust valves. The intake valves are made of steel and feature thick heads.
__________________________________________________ __________________________________________________ ______________________
Also have available NIB
GM Rocker stands (LS3,LSA)
LS9 Heads gaskets
Last edited by 2bridges; 04-28-2014 at 01:05 PM.
#5
9 Second Club
iTrader: (119)
any interest in a set of ready to go TFS 225's (bigger than 225 now) & vic jr combo? I just had them gone through and Heavily ported by AES and port matched along with a multi angle valve job (intake was ported inside but not by AES, but AES port matched it to the heads). There's a pretty penny in this setup so it will be far from a straight trade, and i'm still debating the idea of down sizing the build a bit, but if you're interested, lmk and we can discuss it further.
The intake is also PC'd black and i have a matching Aarons elbow too.
The intake is also PC'd black and i have a matching Aarons elbow too.