Delphi / MSD 50lb 57lb Fuel Injectors - Set of 8 EV1
12-16-2014, 03:58 PM
#1
Launching!
Thread Starter
iTrader: (24)
Join Date: Mar 2010
Location: Miami, FL
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Delphi / MSD 50lb 57lb Fuel Injectors - Set of 8 EV1 Category: Engine - Intake/Fuel
Price: $265
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird, Front wheel drive vehicles
Location (State): FL
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, LT1/LT4, Small Block, Big Block
LS Engine?: Fits LS Engine
Great condition, about 6k miles.
Upgraded client to larger injectors.
They have EV1 connectors and are high impedance.
Should be plug and play for LS1/LS6 as well as Ford 5.0.
May fit other setups easily with connector adapters.
265 shipped
Check my Trader Rating
Specifications
Part Number 17113738 (OE # 17104487)
Static Flow Rate: 50.0 lb/hr @ 43.5PSI (300kPa) 525cc/min or 6.4gm/sec (Ford pressure)
Static Flow Rate: 57.7 lb/hr @ 58.0PSI (400kPa) 606cc/min or 7.4gm/sec (LSx pressure)
Dynamic Flow Rate: 1.1 gm/pulse - 2.5ms pulse width and 10ms repetition rate @ 43.5PSI (300KPa)
Dynamic Flow Rate: 1.3 gm/pulse - 2.5ms pulse width and 10ms repetition rate @ 58.0PSI (400KPa)
Coil Resistance: 12 Ohms / High Impedance / High-Z (No ECM driver modifications required)
Cone Spray Angle - 22.4 degrees - Single spray cone. Approximate cone angle for 90% of spray volume.
Ball/Seat Design with 6-Hole Diffuser Disc
Flow tested by Delphi to 2% tolerance.
