W2BuyNow: 408ci Stroker or above: Paypal Ready
#1
Teching In
Thread Starter
Join Date: Mar 2008
Location: Houston
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
W2BuyNow: 408ci Stroker or above: Paypal Ready
I just dropped a 408 in my vette and a buddy of mine fell in love with the power. He wants to scrap his forged 347 for the bigger cubes.
With that being said, we need a forged 408 short block (or larger, up to 440ci) that was built to hold up to at least a 200 shot of Nitrous. Of course the pistons and all other associated parts need to be built to handle the dope. No rip offs here guys, please have a quality product if you offer anything.
Motor must not have more than 4000 to 8000 miles and in supurb shape.
The motor will be going into a C5 corvette.
Would possibly be interested in a long block if an excellent offer fell on the table.
I am well aware of what things cost so please no unfairly priced motors.
Anyone want to make some cash? What can you offer. Finger is on the paypal button for the right set up
Thanks,
Jeremy
With that being said, we need a forged 408 short block (or larger, up to 440ci) that was built to hold up to at least a 200 shot of Nitrous. Of course the pistons and all other associated parts need to be built to handle the dope. No rip offs here guys, please have a quality product if you offer anything.
Motor must not have more than 4000 to 8000 miles and in supurb shape.
The motor will be going into a C5 corvette.
Would possibly be interested in a long block if an excellent offer fell on the table.
I am well aware of what things cost so please no unfairly priced motors.
Anyone want to make some cash? What can you offer. Finger is on the paypal button for the right set up
Thanks,
Jeremy
Last edited by Murder-1; 01-07-2009 at 08:41 PM.
#3
Teching In
Thread Starter
Join Date: Mar 2008
Location: Houston
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
#6
TECH Resident
iTrader: (94)
Join Date: May 2003
Location: port st lucie florida
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
Ive got a 408 iron block setup. $6,500 shipped firm
iron block bored 0.030 over , torque plate honed
callies compstar 4.00 crank
oliver forged rods
diamond flat top pistons.
All clevite "H" bearings
ported LS6 oil pump
Patrick G custom cam 244-255/ 625-625-115 nitrous cam made for 200 and above
main studs
comp hex adjust timing set
ET performance 245 heads
hardend pushrods
head studs
MLS gaskets
with these heads its 12.5 compression and will handle a 400 shot on proper tune
The engine is still in the car with about 5,000 street miles and was never at the track
It can be removed in on day and shipped the next. PM me if you want it.
iron block bored 0.030 over , torque plate honed
callies compstar 4.00 crank
oliver forged rods
diamond flat top pistons.
All clevite "H" bearings
ported LS6 oil pump
Patrick G custom cam 244-255/ 625-625-115 nitrous cam made for 200 and above
main studs
comp hex adjust timing set
ET performance 245 heads
hardend pushrods
head studs
MLS gaskets
with these heads its 12.5 compression and will handle a 400 shot on proper tune
The engine is still in the car with about 5,000 street miles and was never at the track
It can be removed in on day and shipped the next. PM me if you want it.
#7
TECH Apprentice
iTrader: (6)
Join Date: Oct 2007
Location: Newberg Oregon
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Check out an HKE block They are top notch and pretty resonable on price. 99blancoss has one ready to ship in the nw section for sale ads and I think its located in houston even.
Trending Topics
#8
10 Second Club
iTrader: (19)
Join Date: Aug 2008
Location: Kentucky
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
i'll sell you the motor out of my car complete turn key
https://ls1tech.com/forums/vehicles-...l#post10430967
https://ls1tech.com/forums/vehicles-...l#post10430967
#13
MASS seller approved
iTrader: (160)
I just dropped a 408 in my vette and a buddy of mine fell in love with the power. He wants to scrap his forged 347 for the bigger cubes.
With that being said, we need a forged 408 short block (or larger, up to 440ci) that was built to hold up to at least a 200 shot of Nitrous. Of course the pistons and all other associated parts need to be built to handle the dope. No rip offs here guys, please have a quality product if you offer anything.
Motor must not have more than 4000 to 8000 miles and in supurb shape.
The motor will be going into a C5 corvette.
Would possibly be interested in a long block if an excellent offer fell on the table.
I am well aware of what things cost so please no unfairly priced motors.
Anyone want to make some cash? What can you offer. Finger is on the paypal button for the right set up
Thanks,
Jeremy
With that being said, we need a forged 408 short block (or larger, up to 440ci) that was built to hold up to at least a 200 shot of Nitrous. Of course the pistons and all other associated parts need to be built to handle the dope. No rip offs here guys, please have a quality product if you offer anything.
Motor must not have more than 4000 to 8000 miles and in supurb shape.
The motor will be going into a C5 corvette.
Would possibly be interested in a long block if an excellent offer fell on the table.
I am well aware of what things cost so please no unfairly priced motors.
Anyone want to make some cash? What can you offer. Finger is on the paypal button for the right set up
Thanks,
Jeremy
sell ya my 408 shortblock built for more than a 200 shot lol
4000$ shipped i have an intake, for extra if you wanted pm me if interested i may trade + cash on your part for the 347