WTB: LS accessories, brackets, from F-body or CTS-V or GTO L@@K!
#1
WTB: LS accessories, brackets, from F-body or CTS-V or GTO L@@K!
Hello car enthusiasts,
I am doing a LS swap for 240sx 1995 S14.
1. I need the F-body or vette accessories and brackets, complete set with compressor, balancer, alternator, PS pump, tensioners etc...
I will be buying a brand new water pump so I dont really need that part (Save on shipping)
2. I also need a RETURN STYLE LS1 Fuel rail if you have one
I am doing a LS swap for 240sx 1995 S14.
1. I need the F-body or vette accessories and brackets, complete set with compressor, balancer, alternator, PS pump, tensioners etc...
I will be buying a brand new water pump so I dont really need that part (Save on shipping)
2. I also need a RETURN STYLE LS1 Fuel rail if you have one
Last edited by kingtal0n; 01-28-2017 at 01:58 PM.
#4
Doing The truck engine 5.3 Swap into a 95 240sx So I need vette or F-body accessories, the whole thing with brackets and so forth please to the top
-PS pump and bracket
-Alt & bracket
-water pump pulley (pump I will replace)
-balancer/crank pulley
-a/c compressor & bracket
-tensioners and idler pulleys
-belt if you have it
-what am i forgetting?
-PS pump and bracket
-Alt & bracket
-water pump pulley (pump I will replace)
-balancer/crank pulley
-a/c compressor & bracket
-tensioners and idler pulleys
-belt if you have it
-what am i forgetting?
#5
TECH Resident
iTrader: (57)
Doing The truck engine 5.3 Swap into a 95 240sx So I need vette or F-body accessories, the whole thing with brackets and so forth please to the top
-PS pump and bracket
-Alt & bracket
-water pump pulley (pump I will replace)
-balancer/crank pulley
-a/c compressor & bracket
-tensioners and idler pulleys
-belt if you have it
-what am i forgetting?
-PS pump and bracket
-Alt & bracket
-water pump pulley (pump I will replace)
-balancer/crank pulley
-a/c compressor & bracket
-tensioners and idler pulleys
-belt if you have it
-what am i forgetting?
T,
#6
TECH Fanatic
iTrader: (42)
I have a complete accessory f body setup on a motor I pulled out of my 99 Camaro. 25% underdrive crank pulley. The plug on the compressor was broke but the pins were still there and working. PM me if you are interested. Im putting an LSA blower on that motor now and have gone to c5 vette spacing.
#7
Is this a good valley cover to go with an LS1 or LS6 intake manifold, to delete the terrible PCV problems,
http://www.ebay.com/itm/LS1-LS6-Engi...NRElMw&vxp=mtr
Is that the same as an LS6 valley cover?
http://www.ebay.com/itm/LS1-LS6-Engi...NRElMw&vxp=mtr
Is that the same as an LS6 valley cover?
Trending Topics
#11
I have a complete front accessory set up off of a 01 Camaro. Has every bracket, PS Pump, Alternator, A/C Compressor, Balancer...everything. I also have a SFI balancer for f-body spacing if you would be interested. I am in Ohio, but my parents spend their winters in Ft. Myers FL. They will be be in Ohio in a week or so for my girls birthday, then will be heading back to FL. Shoot me a PM if you're interested.
#12
TECH Junkie
iTrader: (100)
Hello car enthusiasts,
I am doing a LS swap for 240sx 1995 S14.
1. I need the F-body or vette accessories and brackets, complete set with compressor, balancer, alternator, PS pump, tensioners etc...
I will be buying a brand new water pump so I dont really need that part (Save on shipping)
2. I also need a RETURN STYLE LS1 Fuel rail if you have one
I am doing a LS swap for 240sx 1995 S14.
1. I need the F-body or vette accessories and brackets, complete set with compressor, balancer, alternator, PS pump, tensioners etc...
I will be buying a brand new water pump so I dont really need that part (Save on shipping)
2. I also need a RETURN STYLE LS1 Fuel rail if you have one
ps pump, pulley and bracket (no reservoir).
Tensioner
AC compressor (and complete system) and brackets
#13
Thanks everyone, I was able to get a complete F-body setup, HOWEVER:
I am STILL looking to buy spares. If you have any spare brackets, or accessories, for GTO, Fbody, Corvette, even just a balancer for a vetter or something, I would be interested. Any tensioners, idlers, even bolts and belts are fair game. I would like to gather a few different versions so that I can mix and match my engine until I get everything to fit correctly.
I am also looking for brand new gaskets for the engine, oil pan, intake manifold, exhaust MLS, any gaskets you have new I could buy thanks
I am STILL looking to buy spares. If you have any spare brackets, or accessories, for GTO, Fbody, Corvette, even just a balancer for a vetter or something, I would be interested. Any tensioners, idlers, even bolts and belts are fair game. I would like to gather a few different versions so that I can mix and match my engine until I get everything to fit correctly.
I am also looking for brand new gaskets for the engine, oil pan, intake manifold, exhaust MLS, any gaskets you have new I could buy thanks