wont run after cam install
04-26-2009, 07:35 PM
#1
Launching!
Thread Starter
Join Date: Dec 2008
Location: Hammond,La
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
wont run after cam install Just got done with installing a thunder racing TR 230/224 .575/.563 111lsa cam started right up and after about 30 seconds began to hear valvetrain noise so i shut it down and found a messed up rocker. After replacing the rocker it wouldnt start so i pulled the plugs and they were drenched in fuel, i thought no fire, tested that its got fire, changed the plugs still same thing, checked the crank sensor and it was bad replaced it still wont start. If anyone has any idea what is wrong or it just needs a tune that bad please let me know
