PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

Storm . . . HELP

Thread Tools
 
Search this Thread
 
Old 06-22-2010, 05:53 PM
  #1  
Launching!
Thread Starter
iTrader: (7)
 
cryptnosis's Avatar
 
Join Date: Apr 2007
Posts: 251
Likes: 0
Received 0 Likes on 0 Posts
Default Storm . . . HELP

Pensacola had a bad storm yesterday and i was unlucky enough to drive through it. Now my car is sounding bad, SES light has come on and the car is driving rough. I would like some opinions on what ya think it is? I think the O2 on the left side went out. You can tell something is wrong as soon as you look at the scan. and here are the DTCs
----------------
[ECM] P0171 - Fuel Trim System Lean Bank 1 (SES) (Old) (History) (Immature)
[ECM] P0172 - Fuel Trim System Rich Bank 1 (Old) (Immature)
[ECM] P0175 - Fuel Trim System Rich Bank 2 (Old) (Immature)
[ECM] P0327 - Knock Sensor Circuit Low Voltage (Old) (Immature)
[ECM] P0171 - Fuel Trim System Lean Bank 1
Attached Files
File Type: hpl
idle.hpl (57.3 KB, 56 views)
Old 06-23-2010, 07:31 AM
  #2  
TECH Senior Member
iTrader: (3)
 
Old Geezer's Avatar
 
Join Date: Jun 2004
Location: GA, USA
Posts: 5,640
Received 70 Likes on 62 Posts

Default

Water in the O2 plugs??
Maybe time to do some cleanup..IE: clean all the connections, add some dielectric grease, make sure all are tight, no pins loose, bent.
Old 06-23-2010, 06:18 PM
  #3  
Launching!
Thread Starter
iTrader: (7)
 
cryptnosis's Avatar
 
Join Date: Apr 2007
Posts: 251
Likes: 0
Received 0 Likes on 0 Posts
Default

Here is an update.... I lost all codes except
[ECM] P0171 - Fuel Trim System Lean Bank 1 (Immature)

here is a nother run. this time me driving, how do i reset my LTFTs without using HPT Editor.
Attached Files
File Type: hpl
run1.hpl (166.8 KB, 60 views)
Old 06-24-2010, 04:53 PM
  #4  
Launching!
Thread Starter
iTrader: (7)
 
cryptnosis's Avatar
 
Join Date: Apr 2007
Posts: 251
Likes: 0
Received 0 Likes on 0 Posts
Default

new discovery, day 3 of driving. . . everytime I start the car (after it sitting for a while) and have scanner running it starts of with my LTFT on the left side Maxed out. Everytime, I reset the fuel trims it works PERFECT until I let it sit for a prolong period.
Attached Files
File Type: hpl
final2.hpl (315.4 KB, 848 views)




All times are GMT -5. The time now is 02:01 PM.