How to do it? Bs3, 8 coils, and no factory style crank reluctor wheel.
11-24-2010, 11:22 PM
#1
FormerVendor
Thread Starter
iTrader: (7)
Join Date: Dec 2004
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
How to do it? Bs3, 8 coils, and no factory style crank reluctor wheel. Is there a way to ditch the factory style reluctor wheel, run an external crank trigger and then use the factory cam signal to fire all 8 coils using a bs3?
11-25-2010, 09:09 AM
#3
https://ls1tech.com/forums/new-products-showcase/1150673-virginia-speed-crank-trigger-bracket-ls-engines.html
Looks like Shawn whipped up a nice bracket for this application.
I was unable to find a wheel, but I am sure John at BS3 could help you out.
I checked into this before and I believe that some of the guys running higher RPM combos switch to the front mounted crank wheel for improved accuracy.
I wouldn't think it would take very much effort to set up.
Jim
Another option from Kurt Urban.
http://www.kurturbanperformance.com/...r-bracket.html
The MSD flying magnet wheel will require the BS3 box to be reset to operate off a 4x signal.
Looks like Shawn whipped up a nice bracket for this application.
I was unable to find a wheel, but I am sure John at BS3 could help you out.
I checked into this before and I believe that some of the guys running higher RPM combos switch to the front mounted crank wheel for improved accuracy.
I wouldn't think it would take very much effort to set up.
Jim
Another option from Kurt Urban.
http://www.kurturbanperformance.com/...r-bracket.html
The MSD flying magnet wheel will require the BS3 box to be reset to operate off a 4x signal.
Last edited by camarols1; 11-25-2010 at 10:13 AM.
