problems need help
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Aug 2009
Location: Detroit,MI
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
problems need help
I don't know if this should be asked in this forum but I'm going to give it a try I'm using a lingenfelter conversion box I have a 98 ta with a ls2 in it with a 58 tooth wheel.Now I've ran this all last summer no problems but now it cuts off and wont start up sometimes 30min sometimes hours but eventually it starts have anyone had problems with their box malfunctioning thx in advance it threw some codes first crank then camshaft sensor I changed both still have the issue
#4
10 Second Club
iTrader: (3)
Join Date: Nov 2002
Location: Lubbock,TX
Posts: 542
Likes: 0
Received 0 Likes
on
0 Posts
I had a similar scenario with a '99 T/A. Would run great when it would run. Might start 10 times in a row, then not start for seconds, minutes, hours, or days. Basically did what it wanted. Started out by checking for fuel pressure. Had good pressure. Next checked for spark....no spark. Replaced crank position sensor twice....same thing. ohmed out wires for crank position sensor...checked good. Replaced computer.....no more problems.