Need tuning advice on injectors
#1
TECH Enthusiast
Thread Starter
iTrader: (8)
Join Date: Oct 2002
Location: Fort Lauderdale
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
Need tuning advice on injectors
Turbo is back on the car and I installed my In tank Walbro last night. I have a set of 50lb injectors sitting ready to be put in. I also have a wideband and an Elec FP Guage...
I would like to get the car tuned for idle and part throttle for now. Where should I start? Basically, if I am upgrading from stock injectors to 50lb injectors, where should I scale the IFR table to before starting the car for the first time?
If I start it with the stock program and new injectors I am assuming this would be a bad idea as it would be waaay to much fuel.
I would like to get the car tuned for idle and part throttle for now. Where should I start? Basically, if I am upgrading from stock injectors to 50lb injectors, where should I scale the IFR table to before starting the car for the first time?
If I start it with the stock program and new injectors I am assuming this would be a bad idea as it would be waaay to much fuel.