Disabling ECU Features
#1
Teching In
Thread Starter
Join Date: Feb 2011
Location: Sydney Australia
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Disabling ECU Features
I have an lS3 running without the BCM.
When I scanned it this morning I had 18 fault codes.
4 of the codes relate to the fuel level sensor having a high reading. As I don't use the stock sensor and the pins have been removed from the harness I can understand that.
2 of the codes relate the fans turning on as soon as the car starts up. I know this can be adjusted via EFI Live.
The last 12 relate to the missing 3rd and 4th o2 sensors and/or their heating circuits.
Can I hae the settings changed in the ECU, via EFI Live to trun off the fuel level sensor codes and also delete the 3rd & 4th o2 sensors?
When I scanned it this morning I had 18 fault codes.
4 of the codes relate to the fuel level sensor having a high reading. As I don't use the stock sensor and the pins have been removed from the harness I can understand that.
2 of the codes relate the fans turning on as soon as the car starts up. I know this can be adjusted via EFI Live.
The last 12 relate to the missing 3rd and 4th o2 sensors and/or their heating circuits.
Can I hae the settings changed in the ECU, via EFI Live to trun off the fuel level sensor codes and also delete the 3rd & 4th o2 sensors?