99 to 01 OS Hptuners doesnt read sensors
01-24-2013, 09:27 PM
#1
On The Tree
Thread Starter
iTrader: (4)
Join Date: Nov 2007
Location: Northern California.
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
99 to 01 OS Hptuners doesnt read sensors I changed from a 99 tune OS to an 01 OS and now the sensors aren't reading, STFT, LTFT, TEMP, TACH etc... only O2 sensors whats going on?
01-26-2013, 08:05 PM
#2
Moderator
iTrader: (11)
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,605
Likes: 0
Received 6 Likes
on
6 Posts
Have you validated the config file you're using? Reusing
one that worked before, may not play so well.
Now I do not ever recall seeing the PIDs referred to in
that way (TEMP, TACH). If this is how they're called
out, and you're using the "sensor" instead of direct
PIDs, maybe the "sensor" definition is jacked.
Try deleting everything from the table view and then
repopulate it by hand from the PIDs that are valid.
one that worked before, may not play so well.
Now I do not ever recall seeing the PIDs referred to in
that way (TEMP, TACH). If this is how they're called
out, and you're using the "sensor" instead of direct
PIDs, maybe the "sensor" definition is jacked.
Try deleting everything from the table view and then
repopulate it by hand from the PIDs that are valid.