TA2SLOW346

iTrader: (3)

I need to know how to force the car to run open loop all the time? I dont want to run a MAF anymore or deal with O2 sensors. I'll be getting a wideband soon for tuning. Just need to know how to keep the car in open loop. Also once in open loop, can i just use the VE table to tune rich or lean? When in open loop what tables are no longer used and what tables are still used?

bomax

iTrader: (3)

Set the Cold WOT and Hot WOT to zero for all RPM ranges.

Bink

That just throws it into PE 100% of the time. Very little fueling control with PE for part throttle.
Go to the -> Eng Cal->Fuel->Closed Loop Enable Temp, set all cells to 180*C. Now it will stay in Open Loop until 320*F.
Open loop - F/A Multiplier, IFR, VE and PE tables all apply.
You will probably need to calculate a new VE table. FWIW.

joel

TA2SLOW346

iTrader: (3)

Once in open loop, can i tune it with the PE table still or just the VE table?