Best way to link EFI Live to LC1 for logging?
03-04-2014, 11:48 AM
#1
TECH Apprentice
Thread Starter
iTrader: (3)
Join Date: Nov 2012
Location: Auburn Alabama
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
Best way to link EFI Live to LC1 for logging? I have an 88 Mustang 5.3 411 PCM swap that I am wanting to log wideband on my EFI Live. Anyone have any tips or tricks??
03-04-2014, 10:03 PM
#7
TECH Senior Member
You have to tell V2 several things:
- com port set to Wideband,
- wideband set to Innovate,
- the other stuff does not matter.
You can tell V2 to automatically BBL log the external digital/serial pids so you don't have to explicitly mention them in the BBL pidlists.
There are instructions on all this on the EFILive forum.
- com port set to Wideband,
- wideband set to Innovate,
- the other stuff does not matter.
You can tell V2 to automatically BBL log the external digital/serial pids so you don't have to explicitly mention them in the BBL pidlists.
There are instructions on all this on the EFILive forum.
