How do i avoid downshift 3-2 on dyno ?
#1
Teching In
Thread Starter
Join Date: Jun 2002
Location: Stavanger , Norway, Europe
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
How do i avoid downshift 3-2 on dyno ?
I tried with LS1Edit to reprogram 3-2 downshift mph to a much lower setting, was 82 mph, set 50 mph, but it still down shifted even if speed was above 50 mph when going to WOT ???
Any other tables that needs to be adressed ?
TIA
Any other tables that needs to be adressed ?
TIA
#2
Teching In
Join Date: Jan 2002
Location: Orland Park, IL
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
You need to go to the normal shift table, the hot shift table, and the table on the main page. Change the speed on the 2-1 shift and the 3-2 shift to 20 miles an hour. Make sure you change all 3 tables. Also make sure the car is in drive and not over drive on the dyno and you'll have no problems.
#3
Teching In
Thread Starter
Join Date: Jun 2002
Location: Stavanger , Norway, Europe
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BluHawk141
You need to go to the normal shift table, the hot shift table, and the table on the main page. Change the speed on the 2-1 shift and the 3-2 shift to 20 miles an hour. Make sure you change all 3 tables. Also make sure the car is in drive and not over drive on the dyno and you'll have no problems.