Want some feedback on Ryan at LSXkilr
#1
Teching In
Thread Starter
Join Date: Dec 2012
Location: Salina, KS
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Want some feedback on Ryan at LSXkilr
I just got my Duspeed in to finish my 04 BBM gto, now I need it dyno tuned. What does everyone think of Ryan Mitchell at LSXKILR in Bonner springs? Do they have a loaded dyno, do street tune, etc. Has anyone used him before and what are your thoughts? Any insight would be greatly appreciated, thanks in advance!
#2
On The Tree
iTrader: (6)
Join Date: Jun 2007
Location: Kansas City, Mo
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
I called them about a week ago. When I asked if they did street or dyno tuning, they said they had a loaded dyno and prefer using the dyno over street tuning. My car is a 6 speed. I'm really thinking about taking my car to them when I get the turbo put on it. Their facebook page has some good reviews on it. Sorry, that's all I really know about them. The guy I spoke with was very nice and said to call again if I had any other questions.
#3
11 Second Club
iTrader: (3)
Join Date: Apr 2014
Location: St Louis, MO.
Posts: 624
Likes: 0
Received 0 Likes
on
0 Posts
I am actually sitting at their shop right now getting my turbo car tuned. They use a loaded dyno and also you go out with him and drive it around to dial in the street tune. The drivability is something they really like to get dialed in and I can honestly say, you will not go wrong coming here. I drove from St Louis to come here and yes, I know it is mainly for mustangs, but they tune alot of fbody's. He does fr8trains car and he has a 3rd gen putting down about 1600rwhp.
I mailed my computer so he could put a base, safe tune on it so I could drive it here. The base tune had really good drivability just the way it was. Everyone here is really cool and he will make sure that you are 100% happy before you take the car. Good luck man and you will definitely be happy
I mailed my computer so he could put a base, safe tune on it so I could drive it here. The base tune had really good drivability just the way it was. Everyone here is really cool and he will make sure that you are 100% happy before you take the car. Good luck man and you will definitely be happy
#4
TECH Senior Member
iTrader: (27)
I am actually sitting at their shop right now getting my turbo car tuned. They use a loaded dyno and also you go out with him and drive it around to dial in the street tune. The drivability is something they really like to get dialed in and I can honestly say, you will not go wrong coming here. I drove from St Louis to come here and yes, I know it is mainly for mustangs, but they tune alot of fbody's. He does fr8trains car and he has a 3rd gen putting down about 1600rwhp.
I mailed my computer so he could put a base, safe tune on it so I could drive it here. The base tune had really good drivability just the way it was. Everyone here is really cool and he will make sure that you are 100% happy before you take the car. Good luck man and you will definitely be happy
I mailed my computer so he could put a base, safe tune on it so I could drive it here. The base tune had really good drivability just the way it was. Everyone here is really cool and he will make sure that you are 100% happy before you take the car. Good luck man and you will definitely be happy
#6
11 Second Club
iTrader: (3)
Join Date: Apr 2014
Location: St Louis, MO.
Posts: 624
Likes: 0
Received 0 Likes
on
0 Posts
$450 for the street and dyno tune. He did an awesome job, I'll post my graph. I didn't want to go any higher than this on my stock bottom end and I think my cam was holding me back up top, but it made the power I wanted without spinning it high anyways.
Made this power at 9psi at 11 deg timing on lower rpms and it maxed at 13 deg at 6000rpms, so it's a pretty safe tune and has everything set if it boost spikes it pulls all my timing and dumps fuel. Here's the graph and this is a load bearing dyno.
Made this power at 9psi at 11 deg timing on lower rpms and it maxed at 13 deg at 6000rpms, so it's a pretty safe tune and has everything set if it boost spikes it pulls all my timing and dumps fuel. Here's the graph and this is a load bearing dyno.