PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

What made the LTFT's go positive...

Thread Tools
 
Search this Thread
 
Old 08-21-2004, 06:48 PM
  #1  
TECH Apprentice
Thread Starter
iTrader: (5)
 
BlackWS6LS1's Avatar
 
Join Date: Nov 2001
Location: Lincoln Nebraska
Posts: 320
Likes: 0
Received 0 Likes on 0 Posts

Question What made the LTFT's go positive...

Ok, guys I have been chasing knock here lately. So I did top engine cleaner, charged oil, changed plugs, and added 100 octane. So my question is which made the LTFT's go positive? The octane or the plugs.. They were in the -4 to -6 range. Now they are 2 to 3 positive. I need advice before I mess with HP tuners if its just the octane I'll leave it for a while, if its the plugs I'll change it now and get back out there.

Thanks as always.

Z
Old 08-21-2004, 08:33 PM
  #2  
TECH Addict
iTrader: (2)
 
crainholio's Avatar
 
Join Date: Aug 2003
Posts: 2,977
Likes: 0
Received 3 Likes on 3 Posts

Default

In my case it was a dirty MAF sensor. Can of Radio Shack electronics cleaner did the trick.
Old 08-22-2004, 09:15 AM
  #3  
TECH Apprentice
Thread Starter
iTrader: (5)
 
BlackWS6LS1's Avatar
 
Join Date: Nov 2001
Location: Lincoln Nebraska
Posts: 320
Likes: 0
Received 0 Likes on 0 Posts

Default

The two test were only about an hour and a half apart. I just realized what happened. I opened the gap on the spark plugs. So I guess I'm gonna go tune injector flow rate.




All times are GMT -5. The time now is 09:02 PM.