Am i going in the right direction? VE related
#1
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Mar 2003
Location: fresno, ca
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
Am i going in the right direction? VE related
Ok i just read the sticky for the ve table cracked. I did the following formula :VE = ((massflow * IAT / (MAP * RPM * Displacement))
So with my logged data i got VE= ((265.93 gm/sec * 297.15 kelvin / (.95 Bar * 5225 *.006)) and i got 268.15. Now the value for me ve table in tuner cat for 95kpa is 373.01 at that rpm. im getting a positive 5 ltrim during this log. So do i just replace the 373.01 with 268.15 and will that take care of the ltrim in that cell and then of course i would scale accordingly with the rest of my log results... I thought that lowering the VE table would cause a leaner mixture, am i backwards? Also why am i only getting 95 kpa at WOT, is this because of a intake restriction somewhere? I really need help and advice
Thanks
So with my logged data i got VE= ((265.93 gm/sec * 297.15 kelvin / (.95 Bar * 5225 *.006)) and i got 268.15. Now the value for me ve table in tuner cat for 95kpa is 373.01 at that rpm. im getting a positive 5 ltrim during this log. So do i just replace the 373.01 with 268.15 and will that take care of the ltrim in that cell and then of course i would scale accordingly with the rest of my log results... I thought that lowering the VE table would cause a leaner mixture, am i backwards? Also why am i only getting 95 kpa at WOT, is this because of a intake restriction somewhere? I really need help and advice
Thanks