PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

vehicle codes on high idle

Thread Tools
 
Search this Thread
 
Old 12-06-2005, 02:20 AM
  #1  
TECH Apprentice
Thread Starter
iTrader: (2)
 
flynlow3's Avatar
 
Join Date: May 2005
Posts: 353
Likes: 0
Received 0 Likes on 0 Posts
Default vehicle codes on high idle

I had my car scanned at advanced autoparts store because it had a high idle. Its a 99 ss camaro. It has no ses light on. The Security light is always lit though. This is word for word what the scan tool printed:

Vehicle scanned
1999 camaro
G=5.7L
Manual trans

Set DTCs (codes)

History DTC P0102
MAF of VAT
Circuit Low Input

MIL NO REQUESTED
Since ign PASS
Since Clear P/T



Hope this makes since to someone. The guys at AAP store had no idea what anything meant!
Thanks
Jeff
Old 12-06-2005, 11:17 AM
  #2  
TECH Regular
iTrader: (1)
 
Dixit's Avatar
 
Join Date: May 2005
Location: Canton GA
Posts: 434
Likes: 0
Received 0 Likes on 0 Posts

Default

Could possibly be your MAF, if you are a Fbody, disconnect and see how it runs, (you will be in SD mode) and if it runs fine, then most likely your MAF is bad or the calibration is horribly off on the MAF. But that would only be the case if someone has changed your tune.

Dixit
Old 12-06-2005, 11:44 AM
  #3  
On The Tree
 
Purrvert's Avatar
 
Join Date: Dec 2004
Location: Satellite Beach, fl
Posts: 100
Likes: 0
Received 0 Likes on 0 Posts

Default

Failed MAF, disconected MAF or possibly just a dirty air filter. Or a air leak behind the MAF allowing engine to run without MAF seeing adequate airflow.




All times are GMT -5. The time now is 03:20 AM.