MAP Sensor question
#1
12 Second Club
Thread Starter
iTrader: (2)
Join Date: Jan 2004
Location: Palos Hills, IL
Posts: 3,321
Likes: 0
Received 0 Likes
on
0 Posts
MAP Sensor question
PCM threw a code for both aspects of the MAP sensor it seems. The Sensor "guage" on the HP tuners was not registerring more than 20. No more no less only @ 20. Double checked the wires they are fine w/ a good connection, would this likely be the sensor itself?
#2
TECH Senior Member
check all the fuses first, specifically the engine sensor fuse.
However if it set this out of the blue, and clearing the codes still yields a 20kpa MAP reading, then likely is the MAP sensor... they're easy to replace, see if you can borrow one from someone just to test
However if it set this out of the blue, and clearing the codes still yields a 20kpa MAP reading, then likely is the MAP sensor... they're easy to replace, see if you can borrow one from someone just to test