PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

How Much Fuel!

Thread Tools
 
Search this Thread
 
Old 03-09-2006, 05:21 PM
  #1  
On The Tree
Thread Starter
 
trucksleeper's Avatar
 
Join Date: Jul 2004
Location: Birmingham,Alabama
Posts: 149
Likes: 0
Received 0 Likes on 0 Posts

Default How Much Fuel!

I've scaled tables as much as a 160% and have seen little or no changes in AFR. Supercharged car with 12#'s, wideband, speed density. Car is still lean. Any ideas as to what is going on any help would be greatly appreciated.
Old 03-09-2006, 05:40 PM
  #2  
LS1TECH Sponsor
iTrader: (2)
 
foff667's Avatar
 
Join Date: Jul 2003
Location: Clermont, FL
Posts: 7,986
Likes: 0
Received 3 Likes on 3 Posts

Default

post a bin/tun/hpt file...and what "tables" you've scaled there are several tables that affect fueling...are you running an fmu? are you running a 2 bar tune? are your injectors maxing out? Info is helpful
Old 03-09-2006, 05:44 PM
  #3  
TECH Fanatic
iTrader: (4)
 
white2001s10's Avatar
 
Join Date: May 2002
Location: Fairview Heights Illinois
Posts: 1,851
Likes: 0
Received 0 Likes on 0 Posts

Default

You probably have to do your tuning in the back-up VE table instead of the primary.
Old 03-09-2006, 05:46 PM
  #4  
On The Tree
Thread Starter
 
trucksleeper's Avatar
 
Join Date: Jul 2004
Location: Birmingham,Alabama
Posts: 149
Likes: 0
Received 0 Likes on 0 Posts

Default

No fmu, running sumped tank with aeoromotive 1000 inline pump, 42lb svt injectors, @70 psi fuel pressure. i am referring to the ve tables.
Old 03-09-2006, 07:05 PM
  #5  
TECH Fanatic
iTrader: (1)
 
RedHardSupra's Avatar
 
Join Date: Sep 2003
Location: Laurel, MD
Posts: 1,904
Likes: 0
Received 1 Like on 1 Post

Default

then you probably forgot to turn off MAF, or it failed to fail over




All times are GMT -5. The time now is 11:01 PM.