OdessitPashka

iTrader: (8)

My hawk has headers and catted Y that were installed by previous owner and seems that he tried to get rid of EGT and AIR, but either didn't do everything correct or tune didn't take care of the codes.

He told me that the car was tuned, but shouldn't it get rid of all the codes?

I just got P0410 and another code that goes with AIR as well.

I looked at the gearchatter.com and solutions that they offer there are for a stock car, not one with deleted AIR and EGR.

Please let me know what I gotta do to get rid of the codes and pass the emission test.

Thanks

OP

2001NBMZ28

Is the AIR and EGR gone? Sounds like the AIR codes haven't been turned off, or it's still there??????

OdessitPashka

iTrader: (8)

I know that EGR is gone, but not sure about AIR. I've never seen a stock engine bay in my life, so I wouldn't even know what to look for.

2001NBMZ28

Usually people delete AIR and EGR at the same time, along with the codes. Are there any pipes/hoses coming off the top of the headers?

OdessitPashka

iTrader: (8)

That's what I was thinking. Well, I know that plate near the TB is blocked off, that means there is no EGR. And I don't think there are any hoses/pipes coming out of the headers, but I will check tomorrow.

So basically, I'm going to have to get another tune to delete all the codes?

wait4me

iTrader: (10)

I can set it up if you need them deleted. Pm me and ill give you some more info.

OdessitPashka

iTrader: (8)

Great! Thanks a lot!