PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

knock and timming

Thread Tools
 
Search this Thread
 
Old 10-19-2007, 09:22 AM
  #1  
TECH Fanatic
Thread Starter
iTrader: (23)
 
dlove's Avatar
 
Join Date: Sep 2005
Location: Fort Worth
Posts: 1,449
Likes: 0
Received 1 Like on 1 Post

Default knock and timming

im fighting an issue with my car falling on its face only at the top of first.

Today i hooked it up to a snapon scan tool and checked out the timing and the the knock


in all gears at WOT the knock reads 4 degrees and pulls the timing down to 23

i was told the car was tunned to 26 then had 2 degrees taken out for nitrous.

So i unpluged the knock snensor and the timing stayed at like 35 or so and the car still fell on its face at the top of first.


AF is at 13/1 or so and fuel pressure is at 60psi

should the car be reading 4* of knock like that?
Old 10-19-2007, 10:37 AM
  #2  
TECH Fanatic
iTrader: (16)
 
SLP4CamaroSS's Avatar
 
Join Date: Nov 2004
Location: Lawton, ok
Posts: 1,266
Likes: 0
Received 0 Likes on 0 Posts

Default

send me your tune ill look at it
Old 10-19-2007, 11:10 AM
  #3  
TECH Fanatic
Thread Starter
iTrader: (23)
 
dlove's Avatar
 
Join Date: Sep 2005
Location: Fort Worth
Posts: 1,449
Likes: 0
Received 1 Like on 1 Post

Default

im going to get it loaded this weekend hopefully and i will contact you

thanks!
Old 10-19-2007, 01:38 PM
  #4  
TECH Resident
iTrader: (2)
 
radkon's Avatar
 
Join Date: Sep 2004
Location: Cleveland, Oh
Posts: 810
Likes: 0
Received 0 Likes on 0 Posts

Default

KR is bad mm kay, don't listen to anyone that says any different.
Get the timing right and you won't have any KR.




All times are GMT -5. The time now is 01:24 AM.