Trouble Code p0300
11-10-2007, 06:30 AM
#1
On The Tree
Thread Starter
Join Date: Oct 2007
Location: SWEDEN
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Trouble Code p0300 Plugged in my obd2 scanner, on my trans am 00 ls1, Got one trouble code, p0300 Random/Multiple Cylinder Missfire.
What could that be?
/Jocke
What could that be?
/Jocke
Sökfunktionen är bra prova den 
11-10-2007, 03:55 PM
#4
Could be:Cracked plug
Plug wire not snapped on all the way,
Bad plug wire
Bad coil
bad connection at coil
Bad fuel injector
bad connection at fuel injector
Bent or broke pushrod
broken valve spring
broken rocker arm
Tune issue if you have a cam
etc, etc, etc......
11-10-2007, 04:06 PM
#5
On The Tree
iTrader: (4)
Join Date: Aug 2007
Location: Delaware
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
what simptons can for Broken valve springs, Roker arm , or a bent rod???/
My luck it's one of those..........car was very hesitate ......idle is lil rougher....
car won't move it about 4000rpm's .......I have a 3200 Vig. stall just installed
My luck it's one of those..........car was very hesitate ......idle is lil rougher....
car won't move it about 4000rpm's .......I have a 3200 Vig. stall just installed
11-12-2007, 10:26 PM
#6
12 Second Club
iTrader: (1)
Join Date: May 2004
Location: Washington State
Posts: 862
Likes: 0
Received 0 Likes
on
0 Posts
Had that code when I put top engine cleaner in the engine and also a few months ago a mouse chewed one wire near my pcm harness. Fixed the wire and no issues. Look at the wires coming out of you pcm, never know.
04-15-2010, 07:33 PM
#7
Teching In
Join Date: Jun 2009
Location: ohio
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I just fixed my problem with my misfire. I tuned it up 2 times and found a manifold leak and it cleared it instantly. So if u do a tune up and it doesn't fix your problem then check for vacuum problems.
