juanjuan07

I need someone that can send me the device with a few setup programs for my vehicle.
I have an 2001 Firebird WS6 Automatic
Mods: Comp Cam 212/218 .522/.529 114, Comp cam valve springs, LS1 ported heads(just a bit), Long Headers, SLP MAF, SLP Cold air intake, LS6 Intake manifold(2001 models broght it from factory).
Recnt Dyno: 350rwhp 406rwtorque
Wideband show a lean mixture at high rpm: from 12.1(3,500rpm) to 14.3(aprox at 4500+)
I Live in Puerto Rico, almost at sea level and the temps here never gets lower than 80degrees (range from 80-100). ALways use 93octane gas. The car is also for dayli use.
WHat can be offered and what improve can i expect?
Willing to pay whatever it takes to have a real good setup.

juanjuan07

Hey or suggest something else i can do to correct that!!!!!
Would apreciate any suggestion.

code4

iTrader: (30)

You can do a mail order tune. To do that you have to remove your computer & mail it to the tuner. I don't know what shipping would cost from PR.

Or you can purchase a tuning software such as HP tuners & tune it yourself.

juanjuan07

And do you have any idea of who can i contact to tune my PCM?
Or have you heard about someone?

juanjuan07

To setup my car with an HP Tuner is really easy, or do the person have to had experience in that? I know it has to be done on a dyno with wideband

code4

iTrader: (30)

There are several sponsors that do mail order tunes

Here is one: http://www.texas-speed.com/shop/cate...?MID=1&catid=4

Here is the HP Tuners forum. This is how I learned: http://hptuners.com/forum/